Pune-based Vikarsh Nanotechnology & Alloys has bagged some of the best awards across the country for taking a giant stride in the field of nanotechnology that has engineering applications in various fields. Huned Contractor reports
The founders of Pune-based Vikarsh Nanotechnology & Alloys have been rather busy over the past few months not just with production work but for receiving awards and accolades from across the country. The Technology Development Board, a statutory body under Government of India’s Department of Science and Technology recently honoured the company for the successful commercialization of nano-crystalline ribbons and amorphous ribbons, which contributed in foreign exchange savings through these indigenously developed innovative advanced materials.
The award, comprising a trophy and Rs 15 lakhs, was presented to the founders of the company by President Pranab Mukherjee at a special function held at Vigyan Bhavan on May 11, which is celebrated as Technology Day to commemorate the successful nuclear tests carried out in Pokharan on May 11, 1998. Next, it was an award from the Mahratta Chamber of Commerce, Industries and Agriculture in the form of the G S Parkhe Award for Innovation in Entrepreneurship. The citation read: “Sameer Shinde, Milind Wani and Laxmikant Trivedi, founders of Vikarsh Group (2003), had a dream to indigenously develop high-performance magnetic material in India. The dream was realised after a consistent effort of about five years and in December 2014 these products were successfully manufactured by the company.
“These products have passed all international quality and environmental standards and have proved to be five times better in performance as compared to existing available material in India and have caused an estimated savings of foreign exchange of USD 2 million and more in the last financial year.” The company was also awarded ‘The Best Product Developed by an Indian Company’ at Bangalore during ELECRAMA 2016. For the three founders, it has been a long round of celebrations galore and more than anything it is the satisfaction of having finally achieved what they wanted.
Nano and amorphous ribbons are the outcome of complex engineering techniques. Vikarsh Nanotechnology & Alloys has become the first Indian company to develop these products in India for which the Indian industry was largely dependent on imports. The products are widely used in the electrical industry (metering cores, protection cores, LV switchgear cores, reactor cores), electronic industry (SMPS cores, IGBT cores), solar industry (solar reactor cores), welding industry (high-frequency welding inverter cores), nuclear industry (protection and metering cores), defence sector (missile guiding cores, radar and signalling system) and the medical equipment industry (X-ray machines).
Elaborating about how the company came into being, Sameer Shinde says, “I, Milind Wani and Laxmikant Trivedi have been friends since our days of studying in an engineering college. After gaining individual experience of working with MNCs, we started a firm to make magnetic cores, which, incidentally, was our final year product during the electrical engineering course. In 2009, a quiet revolution was started with soft advance magnetic material used in the electrical and electronics sector. This is almost five times superior material as compared to conventional steel but the technology to make it was available only with two companies, Hitachi Metals and Advanced Technology & Materials Co., China. There was no access to this material by Indian companies and it was difficult to import it. This is where we thought of filling the gap and our research led to us to finally produce it in India for commercial and technological self-reliance of the nation.”
These products are now a vital part of industries where sensing and measuring is required. Being packed with much superior properties as compared to conventional soft magnetic materials, designers can work on new dimensions for various products, as for instance, BS-4 in the automotive industry. It is of use in four-star electrical transformers and can help in saving power as well as reduce global warming and carbon footprints. “The technology to manufacture these products is super-critical and involves a combination of engineering branches. It took us five years of intensive research and development and we first tested its commercial viability in December 2014. We can now proudly state that we are the only company making this product,” Shinde states.
“One of our big achievements was that we became the only Indian company approved by PGCIL for metering cores up to 765 KV. Now, leading industry houses like ABB, General Electric, Siemens, Toshiba, Crompton Greaves and Bharat Heavy Electricals Limited have approved the usage of nano-crystalline ribbons and amorphous ribbons made by us. We are soon planning to enter into an agreement with GE to supply these products globally to all the six countries where it has manufacturing facilities. We have some definite plans to start exporting this product,” he adds.
The enterprising entrepreneurs are now busy developing new grades of these materials with unique features and also new product lines for solar reactors and power supply units for high-frequency appliances since core parts for these applications are still imported in India. The company is planning to sign MOUs with engineering colleges to develop new metallurgical products. Speaking about the investment this has entailed, Shinde says, “The first phase of development leading up to commercial production called for an investment of about Rs 200 million. We now have two verticals of Vikarsh viz. Vikarsh Stampings and Vikarsh Nano Technologies & Alloys and there have been huge investments in our magnetic core manufacturing facility. In fact, we are the only company of its kind to have a combination of conventional and advance magnetic material at one place.”
As for the kind of growth that the company envisions for these materials, Shinde says that constant efforts are being made by the government to upgrade the electrical and electronics equipment industry and this has, and will, trigger demand for advanced materials like amorphous ribbons. “Our prediction is that the demand could go up by five times from the present 20,000 MT to 1,00,000 MT by 2020.”
Your email address will not be published. Required fields are marked *
Engineering Review – December 2017
Engineering Review – November 2017
Engineering Review – October 2017
Engineering Review – September 2017
Engineering Review – August 2017
© Divya Media Publications Pvt. Ltd. All rights reserved